Sealer – This is cellulose-based
Candles – These are petroleum-based. One example is the cold wax to dry fast enough, give a little change in color of the wood, and produce an average finish well.
Candles – Silicone-based
These waxes are very fast drying and produce a tough waterproof finish. Timber should be sealed before use, and tend to give a cloudy appearance. If you are looking for wood pallet manufacturers then you can browse various online sources.
Candles – Beeswax
It is a natural product of the beehive that has been given down with alcohol. It can be applied with a brush or cloth and produce a good finish that can be re-polished.
Long oil varnish – It contains more oil than the resin in its formulation. The resin used is usually an alkyd resin or fossils. Long oil varnish flexible, because of the amount of oil and has good durability, making it ideal for exterior use.
It also has a fairly clean finish. Polyurethanes are used for wood left in exposed conditions but tend to be a bit soft for the interior. The life expectancy is two to two and a half years, and the four-coat system is recommended, which is to apply one very thin (diluted) coat followed by three full coats.
Oil varnish – These varnishes dry quickly but tend to be rather fragile. They dry to complete the harder and more suitable for the interior because they do not have the flexibility for exterior use.
Alkyd varnish – It is clear quick-drying varnish suitable for indoor and outdoor use. They are popular as a varnish to the vehicle body, and also applied as a four-coat system.
Teak oil – This oil is easy to apply, but the liberal coatings needed to restore the natural color of the wood.